©
本文档使用 PHP中文网手册 发布
(PHP 4, PHP 5, PHP 7)
imagefill — 区域填充
$image
, int $x
, int $y
, int $color
) imagefill() 在 image
图像的坐标 x
,y
(图像左上角为
0, 0)处用 color
颜色执行区域填充(即与 x, y 点颜色相同且相邻的点都会被填充)。
Example #1 imagefill() 例子
<?php
$im = imagecreatetruecolor ( 100 , 100 );
// 将背景设为红色
$red = imagecolorallocate ( $im , 255 , 0 , 0 );
imagefill ( $im , 0 , 0 , $red );
header ( 'Content-type: image/png' );
imagepng ( $im );
imagedestroy ( $im );
?>
参见 imagecolorallocate() 。
[#1] George Edison [2012-09-27 23:19:10]
Creating a new true-color image, filling it with a transparent color, and saving it as a PNG image can be accomplished with the following:
<?php
$new = imagecreatetruecolor(320, 320);
$color = imagecolorallocatealpha($new, 0, 0, 0, 127);
imagefill($new, 0, 0, $color);
imagesavealpha($new, TRUE); // it took me a good 10 minutes to figure this part out
imagepng($new);
?>
The image needs to be created with imagecreatetruecolor(), you must use imagefill() instead of imagefilledrectange(), and you need to call imagesavealpha(). No other combination of functions calls seems to produce the intended results.
[#2] Christopher Kramer [2009-10-06 15:00:50]
Here is a function to generate a gradient.
You specify width, heigth and 4 colors (of the 4 corners).
An image handle of the gradient image will be returned.
You can copy the returned image onto another image using imageecopy.
This can be helpful if you want to generate a shadow for example.
("Glow effect example": Generate 8 gradients, one for each side and one for each corner. The outer side of the gradients have the background color and the inner sides have a bright color such as white.)
But beware: This function is not optimized for performance, it might become slow on big images. For shadows, better cache the generated gradients.
Note: For gradients, using true-color is highly recommended.
<?php
function gradient($w=100, $h=100, $c=array('#FFFFFF','#FF0000','#00FF00','#0000FF'), $hex=true) {
$im=imagecreatetruecolor($w,$h);
if($hex) { // convert hex-values to rgb
for($i=0;$i<=3;$i++) {
$c[$i]=hex2rgb($c[$i]);
}
}
$rgb=$c[0]; // start with top left color
for($x=0;$x<=$w;$x++) { // loop columns
for($y=0;$y<=$h;$y++) { // loop rows
// set pixel color
$col=imagecolorallocate($im,$rgb[0],$rgb[1],$rgb[2]);
imagesetpixel($im,$x-1,$y-1,$col);
// calculate new color
for($i=0;$i<=2;$i++) {
$rgb[$i]=
$c[0][$i]*(($w-$x)*($h-$y)/($w*$h)) +
$c[1][$i]*($x *($h-$y)/($w*$h)) +
$c[2][$i]*(($w-$x)*$y /($w*$h)) +
$c[3][$i]*($x *$y /($w*$h));
}
}
}
return $im;
}
function hex2rgb($hex)
{
$rgb[0]=hexdec(substr($hex,1,2));
$rgb[1]=hexdec(substr($hex,3,2));
$rgb[2]=hexdec(substr($hex,5,2));
return($rgb);
}
// usage example
$image=gradient(300, 300, array('#000000', '#FFFFFF', '#FF0000', '#0000FF'));
header('Content-type: image/png');
imagepng($image);
imagedestroy($image);
?>
[#3] dunhamzzz [A] gmail [2008-09-01 08:36:09]
I feel its worth pointing out that you cannot fill a transparent colour that you have assigned with imagecolorallocatealpha, the colour will fill, but without its transparency,
I find the easiest method around this is to just fill a rectangle using imagefilledrectangle() to draw a fill instead.
[#4] Cypog [2008-03-17 07:27:44]
imagefill can't deal with alpha colors, use imagefilledrectangle instead.
<?php
header("Content-Type: image/png");
$im = imagecreatefrompng("img/button.png");
if (empty($_GET['alpha']))
{$_GET['alpha'] = 10;}
$color = imagecolorallocatealpha($im, 255, 255, 255, $_GET['alpha']);
imagefillalpha($im, $color);
imagepng($im);
imagedestroy($im);
function ImageFillAlpha($image, $color)
{
imagefilledrectangle($image, 0, 0, imagesx($image), imagesy($image), $color);
}
?>
[#5] info at educar dot pro dot br [2007-03-09 07:54:31]
Example 1
The filled region will be external to a demarcated region, if the initial coordinates will be outside of this region.
<?php
$src621 = imagecreate(200,200);
$clr_1_621 = imagecolorallocate($src621, 255, 255, 0);
$clr_2_621 = imagecolorallocate($src621, 0, 0, 250);
$clr_4_621 = imagecolorallocate($src621, 2,2,55);
imagerectangle($src621, 100, 100, 150, 150, $clr_4_621);
imagefill($src621, 110, 110, $clr_2_621);
header("Content-Type: image/png");
imagepng ($src621);
imagedestroy($src621);
?>
Example 2
The filled region will be internal to a demarcated region, if the initial coordinates will be inside of this region.
<?php
$src622 = imagecreate(200,200);
$clr_1_622 = imagecolorallocate($src622, 255, 255, 0);
$clr_2_622 = imagecolorallocate($src622, 0, 0, 250);
$clr_4_622 = imagecolorallocate($src622, 2,2,55);
imagerectangle($src622, 100, 100, 150, 150, $clr_4_622);
imagefill($src622, 10, 10, $clr_2_622);
header("Content-Type: image/png");
imagepng ($src622);
imagedestroy($src622);
?>
See another examples at:
http://www.educar.pro.br/a/gdlib/index.php?pn=50&tr=97
[#6] Gromitt [2007-03-06 10:14:53]
If you need to fill a whole image (immediatly after its creation for instance), consider applying a filled rectangle instead, using imagefilledrectangle() :
<?php
$gdImage = imagecreatetruecolor(100, 100);
$gdColor = imagecolorallocate($gdImage, 255, 0, 0); // red
imagefilledrectangle($gdImage, 0, 0, 99, 99, $gdColor);
?>
which will require much less logic and processing from GD.
[#7] razonklnbd at yahoo dot com [2006-09-24 03:32:15]
I spend more then two hour to find a function that can fill a pattern or file as background instead of color. but i can't find. so i develop the following function. i though this function will save time who need it...
Function will get four parameter
1. Main Image Identifier
2. Pattern Image Identifier
3. Final Image Width
4. Final Image Height
If you set final image width or height is less then main image width or height then you may get wrong result
<?php
function fill_with_patternfile($p_main_im, $p_patternfile_im, $p_width, $p_height){
$pimiX=$p_patternfile_im;
$pw=imagesx($pimiX);
$ph=imagesy($pimiX);
$targetImageIdentifier=imagecreatetruecolor($p_width,$p_height);
if($pw<$p_width && $ph<$p_height){
for($pX=0;$pX<$p_width;$pX+=$pw){
for($pY=0;$pY<$p_height;$pY+=$ph){
imagecopy($targetImageIdentifier,$pimiX,$pX,$pY,0,0,$pw,$ph);
}
}
}else imagecopy($targetImageIdentifier,$pimiX,0,0,0,0,$pw,$ph);
$w=imagesx($p_main_im);
$h=imagesy($p_main_im);
$nX=0;
if($w<$p_width) $nX=intval(($p_width-$w)/2);
$nY=0;
if($h<$p_height) $nY=intval(($p_height-$h)/2);
imagecopy($targetImageIdentifier,$p_main_im,$nX,$nY,0,0,$w,$h);
return $targetImageIdentifier;
}
// If you want to use a gif or png file as
// pattern file you need to change function below :)
$pattern_im=imagecreatefromjpeg('logo.jpg');
// If you want to use a gif or png file as
// main file you need to change function below :)
$main_im=imagecreatefromjpeg('r2.jpg');
// call the function width 500 and height 500
// if your width and height is less then main images
// width and height then you can't understand any change!
$final=fill_with_patternfile($main_im, $pattern_im, 500, 500);
// view the image and destroy all instance
header('Content-type: image/jpeg');
imagejpeg($final);
imagedestroy($final);
imagedestroy($main_im);
imagedestroy($pattern_im);
exit();
?>
[#8] jonathan dot aquino at gmail dot com [2006-06-08 15:12:46]
Use imageSaveAlpha($image, true); to preserve transparency.
[#9] gelak [2005-11-29 23:27:36]
//A smiley face ;]
<?php
header('Content-type: image/png');
$smile=imagecreate(400,400);
$kek=imagecolorallocate($smile,0,0,255);
$feher=imagecolorallocate($smile,255,255,255);
$sarga=imagecolorallocate($smile,255,255,0);
$fekete=imagecolorallocate($smile,0,0,0);
imagefill($smile,0,0,$kek);
imagearc($smile,200,200,300,300,0,360,$fekete);
imagearc($smile,200,225,200,150,0,180,$fekete);
imagearc($smile,200,225,200,123,0,180,$fekete);
imagearc($smile,150,150,20,20,0,360,$fekete);
imagearc($smile,250,150,20,20,0,360,$fekete);
imagefill($smile,200,200,$sarga);
imagefill($smile,200,290,$fekete);
imagefill($smile,155,155,$fekete);
imagefill($smile,255,155,$fekete);
imagepng($smile);
?>
[#10] pisu at estmail dot hu [2005-11-29 13:48:08]
chess board
<?php
$kep = imagecreate(400,400);
$fekete = imagecolorallocate($kep,0,0,0);
$feher = imagecolorallocate($kep,255,255,255);
//imagefill($kep,50,50,$fekete);
imagefill($kep,50,20,$feher);
for ($i=1;$i<8;$i++) {
$k = $i*50;
imageline($kep,0,$k,400,$k,$fekete);
imageline($kep,$k,0,$k,400,$fekete);
}
for ($i=0;$i<8;$i++) {
for ($j=0;$j<8;$j++) {
$x = $i*50 + 2;
$y = $j*50 + 2;
if ( ( ($i % 2) + ($j % 2) ) % 2 == 0 ) {
imagefill($kep,$x,$y,$fekete);
}
}
}
// imagecolortransparent($kek,$piros);
header('content-type : image/png');
imagepng($kep);
?>
[#11] colin at galaxyinteractive dot net [2005-07-28 20:26:09]
Didn't see this documented, although it's outlined in imagefilledrectangle, it wasn't quite so obvious to me at first
imageSetTile($image,$imageBack);
imagefill($image,0,0,IMG_COLOR_TILED);
Will fill an image with a texture (this is great as I'm building a logo/template creator)
[#12] Igor Garcia [2003-06-28 15:18:38]
This function, cannot deal with transparencies.
So you need to use imagecolorallocate instead of imagecolorallocatealpha.
Thus, be careful with color variables that allready set with imageallocatecoloralpha because this can slow-down or hang-up your system.
[#13] norxh [2003-06-04 20:36:35]
For new images, you must allocate a color before this function will work.
[#14] [2003-02-08 05:49:33]
Actually, it can handle pre-transparent images. To remove it you need to do something like:
imagecolortransparent($img, 0);
to null out the previous transparency colors. ;)
[#15] aqmprod at iname dot com [2000-01-09 05:08:09]
This function does not seem to work with images already been transparent. If you fill at x=0, y=0, and there are still transparent parts that you did
not reach with your fill, they change to a different color.
The ImageColorSet function seems to be the solution, but i can't work with transparancy.