我自己的笔记本（基于Ubuntu 16.04的budgie-remix的发行版）和朋友的NUC主机（Linux Mint 17.3），各连接了一台 HP LaserJet 1020 Plus ，安装了 HPLIP 和 plugin 3.16.5。因为朋友的机器只能通过远程控制，所以打算在本机调试找出原因后再处理远程机器。
两个环境第一次连接识别成功，并成功打印测试页，点击添加后随即出现 communication error (5012)。删除后就再也识别不到打印机。终端运行 hp-setup 提示error: No devices found on bus: usb。
NUC：运行lsusb，有打印机连接，但运行在这个帖子 https://bugs.launchpad.net/hplip/+bug/535056 下看到把当前用户添加到lp组，重启终端lsusb，发现打印机的连接没了
笔记本：运行 lsusb，未显示有打印机连接；重新插拔USB线后马上运行lsusb，明显卡顿但输出仍无打印机连接。拔出打印线，重启打印机，再插入打印线，触发打印机自检，lsusb可见打印机，回显如下：
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0050 Validity Sensors, Inc. Swipe Fingerprint Sensor
Bus 001 Device 004: ID 05c8:0379 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 003: ID 8087:07dc Intel Corp.
Bus 001 Device 015: ID 03f0:2b17 Hewlett-Packard LaserJet 1020
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
HP Linux Imaging and Printing System (ver. 3.16.5)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching for device...
error: Device not found. Please make sure your printer is properly connected and powered-on.
Done.
Saving output in log file: /home/borgchen/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.5)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or
.run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an
already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both
compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 GNU/Linux
Host: borgchen-Notebook
Proc: 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 GNU/Linux
Distribution: 12 16.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.5
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for ubuntu distro 16.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.5
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.16.5
html=/usr/share/doc/hplip-3.16.5
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.5
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
qt5=no
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.16.5
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
notify_upgrade = false
last_upgraded_time = 1462431371
pending_upgrade_time = 0
latest_available_version = 3.16.5
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/usb/HP_LaserJet_1020?serial=S40VK0P"
printer_name =
working_dir = /home/borgchen/Downloads/hplip-3.16.5/hplip-3.16.5-plugin.run
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = true
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 2016年05月06日 15:42:24
version = 3.16.5
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 5.3.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
------------------------
| General Dependencies |
------------------------
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 OK -
python-xml Python XML libraries REQUIRED - 2.1.0 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.25 OK -
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.11.4 OK -
libpthread libpthread - POSIX threads library REQUIRED - 2.23 OK -
python-devel Python devel - Python development files REQUIRED 2.2 2.7.11 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.1.3 OK -
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.1.3 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.11 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
sane SANE - Scanning library REQUIRED - 1.0.25 OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.5 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.5 OK 'hpaio found in /etc/sane.d/dll.conf'
-------------------------
| External Dependencies |
-------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.18 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.1.3 OK 'CUPS Scheduler is running'
network network -wget OPTIONAL - 1.17.1 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
dbus DBus - Message bus system REQUIRED - 1.10.6 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.16.5 OK -
cupsext CUPS-Extension REQUIRED - 3.16.5 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: No destinations added.
--------------
| PERMISSION |
--------------
No errors or warnings.
Done.
HPLIP cannot detect devices in your network. This may be due to existing firewall settings blocking the required ports like (5353/udp). When you are in a trusted network environment, you may open the ports for network services like mdns and slp in the firewall. For detailed steps follow the link.
http://hplipopensource.com/node/375
mdns 5353/tcp # Multicast DNS
mdns 5353/udp
小伙看你根骨奇佳，潜力无限，来学PHP伐。